|
This reservoir is a great product for those who want to add a window and add or replace an existing reservoir in your case and combines them
into one exciting new product. Not only will people be amazed at the site of water in the side of your case but it serves a few essential needs
at the same time. It will act as a visual indicator for the water level as well as help bleed the water system. Made completely from acrylic
sheet in all clear or with a UV reactive blue or green back and includes all the components needed for a window kit installation. You can choose
to go with the stock barbs in 3/8" and 1/2" or you may opt for the optional quick disconnects. The quick disconnect allow you to completely remove
your side panel when working on your system but if you leave extra slack in the hose you should be able to lay the side down when using the stock
barbs. This is a great new product and we are very pleased to be the first to offer it. Made right here in the USA.
SPECIFICATIONS
- All acrylic contstruction
- Divider between inlet and outlet eliminates any bubbles
- Fill system makes bleeding the system very easy
- 8 inches wide x 8 inches tall x 7/8 thick
- Comes in 3 colors
KIT INCLUDES
- Tsunami Window Reservoir
- 1/2 or 3/8 UV reactive fittings
(Optional Quick-Disconnect fittings available)
- 1/8 NPT fill plug with barb and funnel for easy filling
- 3 feet of weatherstripping
- Comes with weatherstripping, washer, razor blade and installation tool
- Installation instructions
Optional Quick Disconnects
These are not just any quick disconnects couplers. They offer a full 3/8" flow (the same as a 1/2" barb) and yet have a built in shut off valve in both
the male and female ends which account for thier size. This means that you can disconnect the reservoir at any time and not have it drain out all over
your floor. Be aware that a few drops (about 4 or 5) will come out every time you disconnect them which is not an issue as long as you know about it
ahead of time. Just don't un-couple them over your $400 graphics card. With these you will be able to disconnect your side panel when working on your
system and not have it in your way. These come with either 1/2" or 3/8" barbs and are a great addition to an already great reservoir.
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
